MEDIA

  1. CIVMATS
  2. MEDIA

Research: Features of Stainless Steel Chemical...(Ⅱ)

Austenitic-ferrite duplex stainless steel is also a type of stainless steel, which contains two phases of almost equal proportion, i.e., half of austenite and half of ferritic. In the case of low C content, Cr content is 18%-28% and Ni content...

Research: Features of Stainless Steel Chemical...(Ⅰ)

Austenitic Stainless Steel: stainless steel with austenitic microstructure at room temperature. When the steel contains about 18% Cr, 8%-10% Ni, and about 0.1% C, it features a stable austenitic structure. Austenitic chromium-nickel stainless steel...

Why Stainless Materials Are Used in the Drainage System

Drainage system plays an important role in food safety when it comes to food production, processing and storage. Firstly, drainage is an integral part of the food processing and storage environment. Since drainage facilities, such as drainage floor...

The Application and Classification of... Wire Rope

In the 1930s, stainless steel wire ropes were designed and developed, and are mainly used in mine excavation and lifting equipment. With the in-depth development of the first industrial revolution, stainless steel wire ropes has been popularized...

Features and Applications of Duplex Stainless Steel

Duplex Stainless Steel (DSS) refers to the stainless steel that contains 50% of ferrite and austenite approximately, or at least 30% of duplex generally. In the case of low carbon content, the Cr content is 18% to 28%, and the Ni content is 3% to 10%...

Why choose stainless steel for water tank? How to maintain...

Stainless steel tank is new generation water tank after the FRP tanks. SUS304 stainless steel sheet is the common material to make stainless steel tank, which is beautiful, economical, practical and durable. Compared with other tanks, stainless steel...

Standardization of Water Supply Pipe in Japan

Before 1955, galvanized pipe was commonly used as the water supply pipe in Tokyo, Japan. From 1955 to 1980, a large number of plastic pipes and steel-plastic composite pipes were used. Although the water quality and leakage problems of the...

How to choose stainless steel to manufacture knives.

Selecting high-quality knives necessitates special attention paid on the steel where the cutting edge is made from. Steel is the very essence of the cutting edge. It can be said without exaggeration that the performance of a knife depends mainly on...

Six Containers of 316L stainless Steel Seamless Pipe to Mexico

On 8 May 2018, six containers of 316L seamless stainless steel pipe, weighting 150 tons, was loaded at Shanghai port, preparing to ship to MANZANILLO. It took two months for CIVMATS to finish the whole production, from receiving the deposit...

Classification